Makita 5007NF Manual de instrucciones

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Circular Saw5007N 5007NF 008671

10 OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this man

11

12 Makita Corporationwww.makita.com 884791A9

2 ENGLISH (Original instructions) SPECIFICATIONS Model 5007N/5007NF Blade diameter 185 mm at 90° 63.5 mm at 45° 45 mm Max. Cutting depth at 56° 3

3 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or movi

4 GEB013-4 CIRCULAR SAW SAFETY WARNINGS Danger: 1. Keep hands away from cutting area and the blade. Keep your second hand on auxiliary h

5 To avoid kickback, do support board or panel near the cut. 000154 Do not support board or panel away from the cut. 000156 • Do not use dull or

6 Fig. 1 000147 Fig. 2 000150 20. Before setting the tool down after completing a cut, be sure that the lower guard has closed and the blade has co

7 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the

8 CAUTION: • Do not apply impact to the lamp, which may cause damage or shorted service time to it. • Do not look in the light or see the sour

9 blade and lead to dangerous kickback and possible serious injury. Release switch, wait for blade to stop and then withdraw tool. Realign tool