Makita LS1220 Manual de instrucciones descargar pdf (Pagina 4)

16.

EXTENSION CORDS. Make sure your extension cord is

good condition.

When using an extension cord, be sure to use one heavy enough to carry

the current your product will draw. An undersized cord will cause a drop

line voltage resulting

loss of power and overheating. Table

shows the

correct size to use depending on cord length and nameplate ampere rating.

doubt, use the next heavier gage. The smaller the gage number, the heav-

ier the cord.

Minimum

aage

for

cord

Ampere Rating

More Than More Than

6 10

10 12

12 16

Not

Volts

12OV 25ft. 50

ft.

100

ft.

150

ft.

Total length of cord

feet

AWG

18 16 16 14

18 16 14 12

16 16 14 12

14 12

Not Recommended

17.

REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is

off position before plugging in.

18.

USE RECOMMENDED ACCESSORIES. Consult the owner's manual for

recommended accessories. The use of improper accessories may cause risk

of injury to persons.

19.

NEVER STAND

TOOL. Serious injury could occur

the tool is tipped or

if the cutting tool is accidentally contacted.

20.

CHECK DAMAGED PARTS. Before further use of the tool, a guard

other

part that is damaged should be carefully checked

determine that

will

operate properly and perform its intended function

check for alignment

of moving parts, binding of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced.

21.

DIRECTION OF FEED. Feed work into a blade or cutter against the direction

of rotation of the blade or cutter only.

22.

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't

leave tool until

comes to a complete stop.

23.

When servicing use only identical replacement parts.

24.

POLARIZED PLUGS. To reduce the risk of electric shock, this equipment has

a polarized plug (one blade is wider than the other). This plug

will

fit

polarized outlet only one way. If the plug does not fit fully

the outlet, reverse

the plug. If

still does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug

any way.

1 2 3 4 5 6 7 8 9 ... 27 28

Comentarios a estos manuales

Sin comentarios

Makita LS1220 Manual de instrucciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Tronzadoras Makita LS1220