Makita LS1216 Manual de instrucciones descargar pdf (Pagina 12)

Installing or removing saw blade

WARNING:

• Always be sure that the tool is switched off and

unplugged before installing or removing the

blade. Accidental start up of the tool may result in

serious personal injury.

• Use only the Makita socket wrench provided to

install or remove the blade.Failure to use the

wrench may result in overtightening or insufficient

tightening of the hex bolt and serious personal

injury.

009483

Lock the handle in the raised position by pushing in the

stopper pin.

009497

To remove the blade, use the socket wrench to loosen

the hex bolt holding the center cover by turning it

counterclockwise. Raise the blade guard and center

cover.

009498

009500

009925

Press the shaft lock to lock the spindle and use the

socket wrench to loosen the hex bolt clockwise. Then

remove the hex bolt, outer flange and blade.

NOTE:

• If the inner flange is removed be sure to install it on

the spindle with its protrusion facing away from the

blade. If the flange is installed incorrectly the

flange will rub against the machine.

WARNING:

• Before mounting the blade onto the spindle,

always be sure that the correct ring for the

blade's arbor hole you intend to use is installed

between the inner and the outer flanges. Use of

the incorrect arbor hole ring may result in the

improper mounting of the blade causing blade

1. Hex bolt

2. Outer flange

3. Saw blade

4. Inner flange

5. Spindle

6. Ring

1. Arrow

2. Arrow

3. Blade case

4. Saw blade

1. Shaft lock

2. Blade case

3. Hex bolt

1. Center cover

2. Socket wrench

3. Hex bolt

4. Blade guard

1. Stopper pin

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentarios a estos manuales

Sin comentarios

Makita LS1216 Manual de instrucciones Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Tronzadoras Makita LS1216