Makita HM0830T Manual de usuario descargar pdf (Pagina 4)

ENGLISH

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

• Note: Specifications may differ from country to country.

Symbols

END201-2

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

............ Read instruction manual.

............. DOUBLE INSULATION

Intended use

ENE045-1

The tool is intended for chiselling work in concrete, brick,

stone and asphalt as well as for driving and compacting

with appropriate accessories.

Power supply

ENF002-1

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

SPECIFIC SAFETY RULES GEB004-2

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to ham-

mer safety rules. If you use this tool unsafely or incor-

rectly, you can suffer serious personal injury.

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handles supplied with the tool. Loss

of control can cause personal injury.

3. Hold tools by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring or its own cord. Contact

with a “live” wire will make exposed metal parts of the

tool “live” and shock the operator.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly

padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

8. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high loca-

tions.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

1. Switch trigger

2. Lock button

3. Side grip

4. Bit

5. Change ring

6. Commutator

7. Insulating tip

8. Carbon brush

9. Screwdriver

10. Rear cover

11. Brush holder cap

12. Hex wrench

13. Hex bolts

14. Grease

Model HM0830T

Blows per minute 2,700 min

-1

Overall length 405 mm

Net weight 4.5 kg

Safety class /II

1 2 3 4 5 6 7 8 9 ... 43 44

Comentarios a estos manuales

Sin comentarios

Makita HM0830T Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Eléctricas Makita HM0830T