Makita HS300D Manual de instrucciones descargar pdf (Pagina 5)

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

•Specifications and battery cartridge may differ from country to country.

•Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Symbols

END004-5

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

... Read instruction manual.

Intended use

ENE028-1

The tool is intended for performing lengthways and

crossways straight cuts and mitre cuts with angles in

wood while in firm contact with the workpiece.

General Power Tool Safety

Warnings

GEA006-2

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

Personal Safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

1. Battery cartridge

2. Button

3. Clamping screw

4. Depth guide

5. Bevel scale plate

6. Cutting line

7. Lock-off lever

8. Switch trigger

9. Shaft lock

10. Hex wrench

11. Hex bolt

12. Outer flange

13. Saw blade

14. Inner flange

15. Protrusion

16. Protrusion (bigger side)

17. Dust nozzle (accessory)

18. Screw

Model HS300D

Blade diameter 85 mm

Max. Cutting depth

at 90° 25.5 mm

at 45° 16.5 mm

No load speed (min

-1

)1,400

Overall length 300 mm

Net weight 1.5 kg

Rated voltage D.C. 10.8 V

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comentarios a estos manuales

Sin comentarios

Makita HS300D Manual de instrucciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Eléctricas Makita HS300D